The R2306 2600KV CCW Brushless Motor has been designed and built specifically for FPV Racing. These Motor series are great affordable motors for a basher build or for a beginner who wants to get in the air and learn all of the basics of flying FPV!

Features:

1. High purity titanium alloy shaft.
2. Longers duration of the flight, low CG design, lightweight design.
3. Vibration Free Operation.
4. Windings are made from copper of high purity.
5. Generates less heat during operations.

Package Includes:

1 x R2306 2600KV CCW Brushless Motor

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II  Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability.

Redesigned from the ground up, the ECO II boasts an all-new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.

In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation.

The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone

Features:

1. Frecision bearing
2. Steel shaft
3. Anodizing
4. 19*19mm hole pattern
5. Multi-strand winding
6. 200mm 18 AWG silicone wire
7. Fully mirror-polished finish that shines and glistens with even the smallest hint of light
8. Upgraded N52SH curved arc magnets for tighter airgap and better performance
9. Massive 12mm EZO bearing for unparalleled smooth operation

Specification:

1. Model: Emax ECOII-2807-1300KV
2. hole pattern: 19 X 19
3. Lead: 200mm 18 AWG
4. Bearing: 4mm
5. Ideal current: 1.3A
6. Internal resistance: 58mΩ
7. No. of cell: 3-6 cell
8. Propeller: 6-7
9. Power watt (6): 1310W
10. Motor weight: 54g

Packages Includes:

1 x Emax ECOII-2807-1300KV Brushless Motor

T Motor Antigravity MN7005 KV115 is a BLDC Drone Motor for Thrust Requirements.  T-Motor’s MN7005 series is an ultralight, endurance-focused motor that was specially designed for various surveying applications. These motors are great for aerial photography!

This Ultra lightweight Antigravity 7005 T-Motors are available with an anti-high temperature curved magnet which increases motor performance by 5%. Energy-saving Antigravity-type Tiger motors have 1.5kg thrust with an efficiency of 13g/W. This type of T motor is made with specially imported German 7075 aviation aluminum alloy, strengthening the motor cap with a lightweight design. Contains an open structure for better cooling performance.

Features:

1. Imported German 7075 aviation aluminum
2. Ultra Lightweight 188g only
3. Anti-high temperature curved magnet
4. Motor performance increase by 5%
5. ATA01123 prop adapter for P22inch prop

Specifications:

1. Motor size: ø79*21mm
2. Stator: Imported silicon steel sheet; Anti-rust treatment; 180° Chigh temperature-resisting coating
3. Configuration: 24N28P
4. Shaft Diameter: IN: 15mm
5. Bearing: Imported 6802ZZ
6. Magnet Level: 150°C high temperature resistance: Level E
7. Lead Cable: 60mm
8. Copper Wire: 180°C high temperature resistance: Level H
9. Coil Insulation Test: 500V
10. Centrifugal Cooling Design: YES
11. Rotor Dynamic Balance Standard: <5mg
12. Motor Dynamic Balance Standard: <10mg
13. IP: IP35

Package Includes:

1 x T Motor Antigravity MN7005 KV115

This A2217 1100kv BLDC Motor is specifically made to power Quadcopters and Multirotors. It is an 1100 kV motor. It provides high performance, superpower, and brilliant efficiency. These motors are perfect for medium size quadcopters with 4 propellers.

The motor comes with a 3mm banana male connector attached which can be directly connected with 70A ESC without any soldering requirement

With a 3-5S LiPo battery,70A ESC  these motors provide up to 2150 gms of thrust each. Using 4 of these motors on a quadcopter with orange propellers will give you a total of 8.6 kg thrust! Use this to build powerful and efficient quadcopters.

This is a low price and excellent quality Brushless Motor.  It comes with Bullet Connectors already soldered

Applications:

1. Drones
2. Quadcopters
3. Multirotors
4. RC Airplanes
5. UAV

Features:

1. The steel design is capable of withstanding competitive conditions.
2. Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
3. Compact size.
4. Offers great performance and value for money.
5. Smooth throttle response for best RC experience.

Specifications:

1. Model: A2217 1100kv
2. Compatible Lipo Batteries: 3S ~ 5S
3. Motor KV (RPM/V): 1100
4. Shaft Diameter (mm): 5
5. Maximum Power (W): 911
6. Required ESC (A): 70
7. Compatible Propellers Size (inch): 12
8. Motor weight: 69g
9. Dimensions: 48 x 27.80mm

Packages Includes:

1 x A2217 1100KV RC Brushless Outrunner Motor welded Banana Connector (Male)

One goal in mind guided the design of the Readytosky MT2204 2300KV Brushless Motor: increasing multirotor performance. The MT2204 2300KV from Readytosky is the new benchmark for multirotor performance. Each motor is designed for a particular kind or application, enabling ongoing improvement and efficiency/power optimization.

The best quality materials, including Japan bearings, N45SH magnets, 0.2mm laminations, 180deg oxygen-free copper wire, 0.005g balancing, and the ideal wind laydown, went into its construction. The MT2204-2300KV Multi-Rotor Motor is 100% QC authorised, and after that, each motor’s design is examined for its type of application, taking into account everything from mounting to prop type adapters.

The bottom motor frame is chamfered for easier installation on narrower frames and has enough of height for mounting hardware to winding clearance.The performance of Multistar Elite speaks for itself, and it is unrivalled in terms of quality and value. It may be used in conjunction with Orange Series HD 5′′ Propeller and Orange 3S Premium Li-PO for an exceptional multirotor flight experience.Worry no more if you are unsure of the ideal motor to use while constructing a drone since we’ve got you covered. We offer everything you need at Robu to get your drone idea off the ground

Features:

1. provides superior Japan Bearings for efficient operation.
2. Long-lasting N45SH magnets are in it.
3. For the optimum operational qualities, 2mm Laminations were used in the design.
4. They are more durable in class thanks to 180deg oxygen-free copper wire.
5. 0.005 g or better balance is shown.
6. flawless lay-down windings

Package Includes:

1 x Readytosky MT2204 2300KV CCW Brushless Motor

This A2217 2300KV brushless out-runner motor specifically made to power Quadcopters and Multirotors. It is a 2300kV motor. It provides high performance, superpower, and brilliant efficiency. These motors are perfect for medium size quadcopters with 7 propellers.

The motor comes with 3mm banana male connector attached which can be directly connected with 30A ESC without any soldering requirement

With a 3S LiPo battery, 40A ESC, and high efficiency 10 propellers, these motors provide up to 960gms of thrust each. Using 4 of these motors on a quadcopter with propellers will give you a total of 3.84 kg thrust! Use this to build powerful and efficient quadcopters.

This is a low price and excellent quality Brushless Motor. It comes with Bullet Connectors already soldered.

Applications:

1. Drones
2. Quadcopters
3. Multirotors
4. RC Airplanes
5. UAV

Features:

1. The steel design is capable of withstanding competitive conditions.
2. Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
3. Compact size.
4. Offers great performance and value for money.
5. Smooth throttle response for best RC experience.

Specifications:

1. Dimensions: 27.8 x 32mm
2. Weight: 68 grams
3. Output shaft diameter: 4.0mm
4. Efficiency: 78%
5. No load current / 10V: 1.7A
6. Current: 30A/60S
7. Efficiency current: 8-28A (>70%)

Packages Includes:

1 x A2217 2300KV RC Brushless Out-runner Motor welded Banana Connector (Male)