- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
Ai-Thinker Rd-03
Add to cart Rd-03 is a radar module developed by Shenzhen Ai-Thinker Technology Co., LTD. It equipped with silicon micro-S3KM1110 chips. S3KM1110 is an integrated single-chip millimeter-wave sensor SoC based on FMCW radar transceiver technology.
Add to Wishlist
Add to Wishlist
Ai Thinker Rd-04
Add to cart Rd-04 is a motion sensing module based on X-band radar developed by Shenzhen Ai-Thinker Technology Co., LTD. The module uses Phosense’s XBR818 chip, and center frequency is 10.525GHz
Add to Wishlist
Add to Wishlist
Chipset: S3KM111L+BL602
Application: smart home apllication
Other attributes
Model Number: Rd-01
Brand Name: Ai-Thinker
Supplier Type: IoT module
Product name: Rd-01
Add to Wishlist
Add to Wishlist
- Good Quality material
- 96-230Vac operating input range
- 50,000 hours MTBF
- 6-month warranty.
- Input Current: 0.5A maximum
- Input Power consumption (no load): 0.075W maximum
- USB-C connection goes straight into your Raspberry Pi
Add to Wishlist
Add to Wishlist
- 1.5 Meter Cable lead
- Micro USB Connector
- Input: 90~264 V AC @47/63 Hz
- Output: 5.2V, 2.5A
- Interchangeable heads for different countries
- 50,000 hours MTBF
Add to Wishlist
Add to Wishlist
- Output voltage: +8.0V DC
- Minimum load current: 0.01A
- Nominal load current: 6.0A
- Maximum power: 48.0W
- Load regulation: ±5%
- Line regulation: ±5%
Add to Wishlist
Add to Wishlist
- Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4).
- A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance.
- Nickel-plated connectors for highest signal transfer rate and resistance in corrosion.
- A large gauge PVC jacket provides maximum shielding against wear and tear and extreme temperatures.
- Reinforced quad-layer braided shielding and Mylar-foil shielding provides utmost protection against RF and EM interference.
- Supports 480i, 480p, 720p, 1080i, 1080p, 1440p and 4K@60p resolution HDMI plug to HDMI plug leads
- Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models
Add to Wishlist
Add to Wishlist
- Nickel Plated Connector Pins
- Fully triple shielded for increased noise immunity
- Length: 10cm
- 4Kp60 compliant
- 20Mohm 300VDC insulation withstands 300VDC for 0.1s
- Compatible with: Raspberry Pi Zero; Raspberry Pi Zero W; Raspberry Pi Zero W2
Add to Wishlist
Add to Wishlist
- Can be used for All development Board with C type port for 5V@3A supply
- Supports Reversible plug orientation
- Simple Plug and Play device, no driver software required.
- Supports High-speed data transfers
- Can be Use for Mobile and Tablets with Fast Charging support
- Compact and Light Weight
Add to Wishlist
Add to Wishlist
- Development board Model: EC-01-Kit
- Adaptive pattern combination: EC-01
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 33.9*28.4*13(±0.2)mm
- Processor: Cortex-M3,
- Support: MPU
- Configurable: CPU frequency, Max 204MHz
- Storage: 4MB NOR Flash on chip
Add to Wishlist
Add to Wishlist
- Module: name ESP-C3-M1-I
- Package: SMD-61
- Size 12.5*13.2*2.4(±0.2)mm
- Antenna: IPEX interface
- Frequency Range: 2400 ~ 2483.5MHz
Add to Wishlist
Add to Wishlist
- Model ESP32-C3F/ ESP-C3-12F
- Package/Case SMD22
- Data Rate: up to 150Mbps
- Supply voltage: 3.6V
- Current: >500mA
Add to Wishlist
Add to Wishlist
- Module: Ca01
- Communication standard: 4G
- Applicable frequency band: LTE-FDD: B1/B3/B5/B8, LTE-TDD: B34/B38/B39/B40/B41
- General characteristics: 3GPP E-UTRA Release 13
- bandwidth:1.4/3/5/10/15/20MHz
- Normal working temperature: -35 ° C ~ + 70 ° C
Add to Wishlist
Add to Wishlist
- Development board Model: EC-01F-Kit
- Adaptive pattern combination: EC-01F
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 33.9*28.4*13(±0.2)mm
- Processor: Cortex-M3,
- Support: MPU
- Configurable: CPU frequency, Max 204MHz
- Storage: 4MB NOR Flash on chip
Add to Wishlist
Add to Wishlist
- Processor: Cortex-M3,support MPU
- Storage: 4MB NOR Flash on chip
- System: Flexible Configuration Support 1.8/2.8/3.3V IO
- Development board Model: EC-01G-Kit
- Adaptive pattern combination: EC-01、EC-01G
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 37.6*32.5(±0.2)mm
Add to Wishlist
Add to Wishlist
- Built-in Flash: 32Mbit
- Power supply: 5V
- WiFi protocol: IEEE 802.11 b/g/n
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- Logic level: 3.3V
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000