- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Non-contact measurement, high safety
- Multiple ranges for various measurement scenarios
- Compatible with 3V3/5V micro-controller
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- power supply: DC 7-30 V
- Input Voltage: 0-10V
- Output current: 4-20mA
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- On-chip display RA
- DPI 111
- Interface UART
- Baud rate with Arduino 230400
Add to Wishlist
Add to Wishlist
- input current (RMS): 5A.
- Max current: 15A.
- Work temperature:-25℃~+70℃.
- Storage temperature:-30℃~+90℃.
- Work voltage:660V.
- Frequency range:50Hz-1KHz.
- Dielectric strength:3.5KV 50Hz 1min
Add to Wishlist
Add to Wishlist
- Closed-loop current transducer using the Hall effect technology
- Primary nominal current of 25A
- 0.5% accuracy
- The primary current measuring range is ±36A
- The supply voltage is ±15V
- The conversion ratio is 1-2-3-4-5: 1000
- Secondary nominal RMS current is 25mA
Add to Wishlist
Add to Wishlist
- Conductivity range: 100 µS/cm to 200 mS/cm
- Cell constant4): typical 0.86 cm-1
- Nominal resistance: 1000 Ω at 0 °C
- Measurement frequency range: 100 Hz to 10 kHz
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Display size: 84.8mm × 63.6mm
- Dot pitch: 0.212 × 0.212
- Resolution: 400 × 300
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 200×200
- Dot pitch: 0.138 × 0.138
- Refresh time: 8s (Transmit time is not included)
- Display color: black, white, red
- Viewing angle: >170°
Add to Wishlist
Add to Wishlist
- Input Current :100A
- Power supply: 15V DC
- Output Type: Voltage
- Output voltage: 4V
- Whole Diameter: 20mm
- Dimensions (L x W x H): 40 x 16 x 60
Add to Wishlist
Add to Wishlist
- Input: Bare conductor
- output 20A: 20mA
- Whole Diameter: 10
- Dimensions (L x W x H) mm: 23 x 25 x 40
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000