- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:8 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x700 mm
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:7 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:11 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:10 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:13 gm
Add to Wishlist
Add to Wishlist
- Designed for 915mhz but works fine on 868mhz too
- Weight: 0.9g
- ~40mm stem
- ~55mm wide top segment (not RF elements)
- Works great with the TBS Crossfire Nano Rx
Note: This is not an original TBS product, but a high-quality clone of one.
Add to Wishlist
Add to Wishlist
- Specially designed for VTX/RX for long range FPV
- Omnidirectional (compatible with video TX/RX)
- Directional Diagram: all-around( Omnibearing)
- Polarization:Circular polarization Right-handed(RHCP)
- Greatly increases video and audio signal.
Add to Wishlist
Add to Wishlist
- Development board Model: EC-01-Kit
- Adaptive pattern combination: EC-01
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 33.9*28.4*13(±0.2)mm
- Processor: Cortex-M3,
- Support: MPU
- Configurable: CPU frequency, Max 204MHz
- Storage: 4MB NOR Flash on chip
Add to Wishlist
Add to Wishlist
- Module: name ESP-C3-M1-I
- Package: SMD-61
- Size 12.5*13.2*2.4(±0.2)mm
- Antenna: IPEX interface
- Frequency Range: 2400 ~ 2483.5MHz
Add to Wishlist
Add to Wishlist
- Model ESP32-C3F/ ESP-C3-12F
- Package/Case SMD22
- Data Rate: up to 150Mbps
- Supply voltage: 3.6V
- Current: >500mA
Add to Wishlist
Add to Wishlist
- Module: Ca01
- Communication standard: 4G
- Applicable frequency band: LTE-FDD: B1/B3/B5/B8, LTE-TDD: B34/B38/B39/B40/B41
- General characteristics: 3GPP E-UTRA Release 13
- bandwidth:1.4/3/5/10/15/20MHz
- Normal working temperature: -35 ° C ~ + 70 ° C
Add to Wishlist
Add to Wishlist
- Development board Model: EC-01F-Kit
- Adaptive pattern combination: EC-01F
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 33.9*28.4*13(±0.2)mm
- Processor: Cortex-M3,
- Support: MPU
- Configurable: CPU frequency, Max 204MHz
- Storage: 4MB NOR Flash on chip
Add to Wishlist
Add to Wishlist
- Processor: Cortex-M3,support MPU
- Storage: 4MB NOR Flash on chip
- System: Flexible Configuration Support 1.8/2.8/3.3V IO
- Development board Model: EC-01G-Kit
- Adaptive pattern combination: EC-01、EC-01G
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 37.6*32.5(±0.2)mm
Add to Wishlist
Add to Wishlist
- Model: ROTG01 (UVC OTG FPV Receiver)
- Connector Type: SMA Female (Antenna)
- Current consumption: 200 mA
- Length of Antenna: 11 cm
- No. of Channels: 150
Add to Wishlist
Add to Wishlist
- Built-in Flash: 32Mbit
- Power supply: 5V
- WiFi protocol: IEEE 802.11 b/g/n
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- Logic level: 3.3V
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000