Ai Thinker ESP Modules and Development Boards
Ai-Thinker EC-01G-Kit NB+IOT Development Board
In stock
| Development board Model |
Development board Model: EC-01G-Kit |
|---|---|
| Flash |
4MB NOR Flash |
| Storage Environment |
-40 ℃ ~125 ℃ ,< 90%RH |
| Spectral Range |
Band3 ,Band5 ,Band8 |
| Series Rate |
Support 110 ~ 4608000 bps ，Default 9600bpsBluetooth Nonsupport |
| IO quantity |
12(contain TX0\RX0 TX1\RX1) |
| Adaptive pattern combination |
EC-01、EC-01G |
| Antenna form NB |
External SMA antenna ,GPS: external IPEX antenna |
| Working Temperature |
-40 ℃ ~ 85 ℃ |
| Supply District |
Power supply voltage 5V current greaterthan500mA |
| Support interface |
UART/I2C/PWM/ADC/GPIO |
| Security |
AES/SHA |
| Packaging: |
DIP-14（2.54Spacing standard row needle) |
| Size |
Size: 37.6*32.5(±0.2)mm |
Ai-Thinker Ai-WB2-12F Module
Out of stock
Ai-Thinker ESP-C3-M1 Wi-Fi + BLE Module
Out of stock
| Module |
name ESP-C3-M1-I |
|---|---|
| Antenna |
IPEX interface |
| Frequency Range |
2400 ~ 2483.5MHz |
| SPI |
Flash 4MByte |
| IO |
IO0 ,IO1 ,IO2 ,IO3 ,IO4 ,IO5 ,IO6 ,IO7 ,IO8 ,IO9 ,IO10 ,IO18 ,IO19 ,IO20 ,IO21 |
| Working Temperature |
-40 ℃ ~ 85 ℃（C3FN4 Normal temperature version ,）-40 ℃ ~ 105 ℃(C3FH4 High temperature version) |
| Store Temperature |
-40 ℃ ~ 125 ℃ ,< 90%RH |
| Power supply range Voltage |
3.0V ~ 3.6V，Electrical current >500mASupport Interface UART/GPIO/ADC/PWM/I2C/I2S/SPI |
| UART Rate |
Support 110 ~ 4608000 bps ，default 115200 bps |
| Bluetooth |
BLE 5.0 ,Does not support traditional Bluetooth |
| Security |
WEP/WPA-PSK/WPA2-PSK |
| Package |
SMD-61 |
| Size |
12.5×13.2×2.4(±0.2)mm |
Ai-Thinker Ca-01 4G Cat.1 LTE Module
Out of stock
| Module |
Ca01 |
|---|---|
| Communication standard |
4G |
| Applicable frequency band |
LTE-FDD: B1/B3/B5/B8 LTE-TDD: B34/B38/B39/B40/B41 |
| General characteristics |
3GPP E-UTRA Release 13 |
| bandwidth |
1.4/3/5/10/15/20MHz |
| Module size |
24.0mm X 24.0mm x 2.3mm |
| Packaging method |
stamp hole + LGA |
| Module weight |
about 2.6g |
| Power supply voltage |
Power supply voltage: 3.3V ~ 4.3V ,typical value 3.8V |
| Supports |
Support VoLTE ,Support Bluetooth ,Support Wi-Fi positioning ,Support SPI Support MIPI Camera ,Support SPI LCD ,Support 6×6 scan keyboard |
| temperature range |
Normal working temperature: -35 ° C ~ + 70 ° C |
| Limit working temperature |
-40 ° C ~ + 85 ° C |
| LTE-TDD |
Class3(23dBm+1/-3dB) |
| LTE-FDD |
Class3(23dBm+ -2dB) |
| UART 1 |
For AT commands and data transmission "Maximum baud rate 921600bps ,default 115200bps ”Support hardware flow control (CTS / RTS) |
| UART2 |
UART2: "For debugging information output" Baud rate 115200bps |
| HOST UART |
used to output debugging information |
| ZSP UART |
ZSP UART: used to output debugging information |
| pins: |
117 |
Ai-Thinker CA-01 Dev. Board
Out of stock
| Model |
CA-01 Dev. Board |
|---|---|
| Brand |
Ai-Thinker |
| Frequency band |
LTE-TDD: B34/B38/B39/B40/B41; LTE-FDD: B1/B3/B5/B8 |
| Support |
VoLTE; Support Camera; Support analog voice |
| Working temperature |
-40℃~+85℃ |
| Working voltage |
3.3V-4.3V ,3.8V power supply is recommended |
| Power consumption |
20uA@shutdown ,3mA@sleep ,typical value |
| Data LTE-TDD |
uplink and downlink ratio 2 [maximum 8Mbps(DL)/maximum 2Mbps(UL)]; uplink and downlink ratio 1[maximum 6Mbps(DL)/maximum 4Mbps(UL)] |
| Data: LTE-FDD |
Maximum 10Mbps (DL)/ Maximum 5Mbps (UL) |