Development Board/Kit
Waveshare Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4
Out of stock
Adafruit Assembled Adafruit Feather HUZZAH with ESP8266 With Headers
Out of stock
DFRobot FireBeetle ESP32-E IoT Microcontroller with Header (Supports Wi-Fi & Bluetooth)
Out of stock
| Operating Voltage(V) |
3.3V. |
|---|---|
| Input Voltage (V) |
3.3V~5.5V. |
| Support Low-Power |
2mA |
| Max Discharge Current |
600mA@3.3V LDO |
| Max Charge Current |
500mA |
| Main Frequency |
240MHz |
| SRAM |
520KB |
| Flash |
4MB |
| Frequency Range |
2.4~2.5 GHz |
| Operating Current (A) |
80mA（Average） |
| Operating Temperature (°C) |
-40℃~+85℃ |
| Module Size |
25.4×60mm/1×2.36 |
DFRobot Beetle ESP32 – C3 (RISC-V Core Development Board)
Out of stock
M5Stack C3 Mate with Pin Headers
Out of stock
| ESP32-C3 |
32bit RISC-V single-core processor ,clocked at 160 MHz |
|---|---|
| Storage |
384KB ROM ,400KB SRAM ,8KB RTC SRAM ,4MB FLASH |
| Wi-Fi |
2.4 GHz band supports 20 MHz and 40 MHz bandwidth ,IEEE 802.11 b/g/n protocol ,data rate up to 150 Mbps |
| Input Voltage (V) |
5V |
| Operating Current (A) |
500mA |
| HMI |
Programmable physical button x 1 ,reset debugging button x 1 ,programmable RGB LED (SK6812) x 1 |
| USB interface |
Type C x1 |
| Antenna type |
2.4G 3D Antenna |
| Module peripheral interface resources |
ADC ,GPIO ,SPI ,UART ,I2C ,I2S ,PWM ,RMT ,DMA ,USB serial port ,TWAI |
| IO interface 13 |
G21 ,G20 ,G9 ,G18 ,G19 ,G1 ,G0 ,G10 ,G8 ,G7 ,G6 ,G5 ,G4 |
| IO interface spacing |
2.54mm |
| Net weight (gm) |
3.8g |
| Dimensional Accuracy (mm) |
34 x 20 x 4.6mm |
M5Stack ATOM Matrix ESP32 Development Kit
Out of stock
| Model |
ESP32 |
|---|---|
| Product Type |
Development Kit |
| ESP32 |
240MHz dual core ,600 DMIPS ,520KB SRAM ,Wi-Fi |
| Flash |
4MB |
| Input Power |
5V @ 500mA |
| Port |
Type C x 1 ,GROVE(I2C+I/0+UART) x 1 |
| Pin Port |
G19 ,G21 ,G22 ,G23 ,G25 ,G33 |
| RGB LED |
WS2812C 2020 x 25 |
| MEMS |
MPU6886 |
| IR |
Infrared transmission |
| Button |
Custom button x 1 |
| Antenna |
2.4G 3D Antenna |
| Case Material |
Plastic ( PC ) |
| Operating Temperature (°C) |
0°C to 60°C |
| Dimensional Accuracy (mm) |
24x24x14mm |
M5Stack AtomU ESP32 Development Kit with USB-A
Out of stock
| Brand |
M5 Stack |
|---|---|
| Product Type |
Development kit with USB |
| ESP32-PICO-D4 |
240MHz dual core ,600 DMIPS ,520KB SRAM ,2.4G Wi-Fi |
| Microphone |
SPM1423 |
| Microphone sensitivity |
94dB SPL@1KHz Typical value: -22dBFS |
| Standby working current |
40.4mA |
| Microphone signal-to-noise ratio |
94dB SPL@1KHz ,A-weighted Typical value: 61.4dB |
| Frequency Range |
100Hz ~ 10KHz |
| Support PDM clock frequency |
1.0 ~ 3.25MHz |
| Weight (g) |
8.4g |
| Product Dimension |
52 x 20 x 10mm |
Ai-Thinker CA-01 Dev. Board
Out of stock
| Model |
CA-01 Dev. Board |
|---|---|
| Brand |
Ai-Thinker |
| Frequency band |
LTE-TDD: B34/B38/B39/B40/B41; LTE-FDD: B1/B3/B5/B8 |
| Support |
VoLTE; Support Camera; Support analog voice |
| Working temperature |
-40℃~+85℃ |
| Working voltage |
3.3V-4.3V ,3.8V power supply is recommended |
| Power consumption |
20uA@shutdown ,3mA@sleep ,typical value |
| Data LTE-TDD |
uplink and downlink ratio 2 [maximum 8Mbps(DL)/maximum 2Mbps(UL)]; uplink and downlink ratio 1[maximum 6Mbps(DL)/maximum 4Mbps(UL)] |
| Data: LTE-FDD |
Maximum 10Mbps (DL)/ Maximum 5Mbps (UL) |
ESP32-WROOM-32U IOT Development Board Module for Arduino
Out of stock
ESP32-SOLO-1 IoT Development Board Module for Arduino
Out of stock
ESP32-WROOM-32UE Development Board Module for Arduino
Out of stock
ESP32-WROOM-32E Development Board Module for Arduino
Out of stock