Gas and Dust Sensor
Waveshare Dust Sensor
Out of stock
| Sensitivity |
0.5V/(100μg/m3) |
|---|---|
| Measurement range |
500μg/m3 |
| Voltage(V) |
2.5V~5.5V |
| Operating Current (A) |
20mA(max) |
| Operating Temperature (°C) |
-10℃~65℃ |
| Storage Temperature |
-20℃~80℃ |
| Life Time |
5 years |
| Mounting Hole Diameter (mm) |
2.0mm |
| Air hole Size |
9.0mm |
| Dimensions (mm) LxWxH |
63.2mm×41.3mm×21.1mm |
Waveshare MQ-2 Gas Sensor
Out of stock
Waveshare MQ-3 Gas Sensor
Out of stock
DFRobot Fermion: ENS160 Air Quality Sensor (Breakout)
Out of stock
Adafruit SGP30 Air Quality Sensor Breakout – VOC and eCO2 – STEMMA QT / QwiicRoHS Compliant
Out of stock
| Brand |
Adafruit |
|---|---|
| Model No. |
SGP30 Air Quality Sensor |
| Interface |
I2C |
| Accuracy |
15% |
| Element |
metal-oxide sensing |
| Voltage (V) |
3.3V or 5V |
| Power Pins |
Vin: this is the power pin. Since the sensor chip uses 3 VDC for logic ,we have included a voltage regulator on board that will take 3-5VDC and safely convert it down. To power the board ,give it the same power as the logic level of your microcontroller – e.g. for a 5V micro like Arduino ,use 5V 1V8: this is the 1.8V output from the voltage regulator ,you can grab up to 50mA from this if you like GND: common ground for power and logic |
| Data Pins |
SCL – I2C clock pin SDA – I2C data pin |
| Length (mm) |
2.5 |
| Width (mm) |
1.5 |
| Height (mm) |
0.5 |
| Weight (g) |
2 g |
AO-08 Medical Oxygen Sensor
Out of stock
| Output |
9 mV to 13 mV in 21%O² |
|---|---|
| Measurement Range |
0 – 100 Vol.% O² |
| Temperature Compensation |
＜2% O² equivalent（0℃-40℃） |
| Response Time |
<15 s |
| Operating Temperature Range |
0℃ – +50℃ |
| Operating Pressure Range |
0.5 Bar – 2.0 Bar |
| Operating Humidity Range |
0% to 99% RH noncondensing |
| Color |
Asper Image |
AO-07 Oxygen Sensor
Out of stock
| Product Type |
Oxygen Sensor |
|---|---|
| Model |
AO-07 |
| Output |
9 mV to 13 mV in 21%O² |
| Measurement Range |
0 – 100 Vol.% O² |
| Temperature Compensation |
＜2% O² equivalent（0℃-40℃） |
| Response Time |
<15 s |
| Operating Temperature Range |
0℃ – +50℃ |
| Operating Pressure Range |
0.5 Bar – 2.0 Bar |
| Operating Humidity Range |
0% to 99% RH noncondensing |
PIMORONI SGP30 Air Quality Sensor Breakout
Out of stock
PIMORONI BME688 4-in-1 Air Quality Breakout (Gas, Temperature, Pressure, Humidity)
Out of stock
| Model |
BME688 |
|---|---|
| Product Type |
4-in-1 Air Quality Breakout (Gas ,Temperature ,Pressure ,Humidity) |
| Operating Voltage(V) |
1.71 V to 3.6 V |
| Operating Current (A) |
3.1 µA |
| Interface |
I²C (up to 3.4 MHz) and SPI (3 and 4 wire ,up to 10 MHz |
| Operating Temperature (°C) |
-40 to +85 °C |
| Standard Scan Speed |
10.8 s / scan |
| Power Consumption (Watt) |
< 0.1 mA in ultra-low power mode |
| Accuracy tolerance |
±3% r.H. |
| Response time |
~8 s |
| Dimensional Accuracy (mm) |
3.0 mm x 3.0 mm x 0.93 mm |
Winsen MH-Z16 NDIR CO2 SENSOR
Out of stock
Winsen ZH03B Particles Sensor PM2.5 Dust Sensor
Out of stock
Winsen MP901 Air-Quality Gas Sensor VOC Gas Sensor
Out of stock