This 7″ LCD Display module with Capacitive touch and HDMI Media Interface is an ideal solution for single-board computer display. Easy to use, this LCD supports SBC’s like Raspberry Pi, BeagleBone Black, Banana Pi etc. Ideal for your application if it involves Video playing etc.

1. EMI and ESD protection, in compliance with CE certification
2. VCOM voltage adjustment for optimizing display effect
3. USB protocol translator, converting the touch signal into standard multi-points touch protocol to achieve smooth multi-points touch control
4. USB and power input solder pads, breakout USB interface, easy for connecting external power supply
5. Backlight adjustment solder pads for PWM signal input, so as to control the backlight brightness, increasing the lifetime of the display

Features: 

1. 800×480 High-Resolution Display
2. Capacitive Touch Control
3. HDMI Interface for Display, USB Interface for Touch Control
4. Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
5. Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
6. Supports BB Black, comes with Angstrom Image
7. Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
8. Backlight control, for lower power consumption.

Package Includes:

1 x 7inch HDMI LCD (B)

1 x HDMI cable

1 x HDMI to Micro HDMI Adapter

1 x USB type A plug to micro B plug cable

1 x RPi screws pack (4pcs)

1 x Quick start sheet

The 4DPi-35-II is a 3.5″ 480×320 Primary Display for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-35-II to function with the Raspberry Pi without the need for a mouse.

Communication between the 4DPi-35-II and the Raspberry Pi is interfaced with a high speed 48Mhz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression, and features a customised DMA enabled kernel.

The 4DPi-35-II is designed to work with the Raspbian Operating System running on the Raspberry Pi, as that is the official Raspberry Pi operating system. It also supports the new PIXEL addition to Raspbian.

Powered directly off the Raspberry Pi, this 3.5″ Touch panel allows effortless connection, and a single download package will get you up and running with a few simple steps. Please refer to the Datasheet for detailed information.

Features:

1. Universal 3.5″Primary Display for the Raspberry Pi.
2. Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Zero, Zero W versions.
3. 480×320 QVGA Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel.
4. Display full GUI output / primary output, just like a monitor connected to the Raspberry Pi
5. High Speed 48Mhz SPI connection to the Raspberry Pi, featuring SPI compression technology.
6. Powered directly off the Raspberry Pi, no external power supply is required.
7. Typical frame rate of 17FPS. Higher if image is able to be compressed by Kernel.
8. On/Off or PWM controlled backlight, selectable by on board jumper.
9. On-board EEPROM for Indentification (Revision 2.x HW only)
10. Module dimensions: 57 x 86 x 21mm (including corner plates). Weighing ~ 53g.
11. Display Viewing Area: 49 x 73.4mm
12. 4x corner plates with 2.6mm holes for mechanical mounting.
13. RoHS and CE Compliant.

Packages Includes:

1 x 4D System 3.5″ resolution Primary Display compatible with Raspberry PI

The gen4 5.0” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems.

This hardware bundle includes the 4D Arduino Adaptor Shield II which allows fast and easy hardware interface to any Arduino board with the standard Arduino Headers and allows you to quickly and easily add a full colour HMI to your Arduino project.

The gen4 series was designed specifically for ease of integration and use, with careful consideration for space requirements and functionality.

These specific gen4 modules feature a 5.0” colour TFT LCD display, and come with options for Cover Lens Bezel (CLB), and resistive touch. They are powered by the well-known 4D Systems Diablo16 Graphics Processor, which offers an array of functionality and options for any Designer / Integrator / User.

The 5.0” Diablo16 Integrated Display Module features a TFT LCD Display, is capable of Touch Detection, microSD memory Storage, GPIO and Communications, along with multiple millisecond resolution timers, and Audio Generation.

The gen4 Series is 100% compatible with the Workshop4 IDE and its 4 different development environments, providing the User with a wealth of options for programming and controlling their system.

The gen4 series of Integrated Display Modules features a 30 pin ZIF socket, designed for a 30 pin FPC cable, for easy and simple connection to an application or mother board, or for connecting to accessory boards for a range of functionality advancements.

The gen4 series of modules has been designed to minimise the impact of display related circuitry, and provide a platform suitable for integration into a product. Application boards can sit flush on the back of the gen4 if required, as the display related electronics sit inside the plastic mounting base, leaving the application board surface clear for User circuitry.

Note: For more info refer to datasheet

Features:

1. Powerful 5.0” Intelligent LCD-TFT display module powered by DIABLO16.
2. 4.0V to 5.5V range operation (single supply).
3. 800 x 480 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel (on DT model only), integrated Capacitive Touch (on DCT model only), or non-touch.
4. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
5. 32Kb of SRAM purely for the User.
6. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Inputs.
7. On-board latch type micro-SD memory card connector for multimedia storage and data logging purposes.
8. DOS compatible file access (FAT16 format) as well as low level access to card memory.
9. Dedicated PWM Audio pin driven by WAV files from micro-SD card, and for sound generation, for an external amplifier.
10. Display full colour images, animations, icons and video clips.
11. Supports all available Windows fonts.

Packages Includes:

1 gen4-uLCD-50DT-SB Extra Bright Intelligent Display Module with Resistive Touch

1 x 4D Arduino Adaptor Shield-II

1 x gen4-IB Interface Board

1 x 30-way 150mm FFC Cable

1 x 5-way female-to-female ribbon cable with male-to-male adaptor

1 x Getting Started Manual Available as a Download

The 70H-1024600 series display, designed by Waveshare Team, is for customers who need a lightweight HDMI display. As it is thinner and lighter than any traditional HDMI display, users can do the second development by themselves easily.
For simplifying the display, we integrate the power supply, display, touch, and control signal as the 40PIN multi-functional header. Just need an FPC cable, you can lower the project cost with the thinnest display, and apply it in any embedded projects.

Features:

1. Support Windows / Linux / Android Main Board Which Has HDMI Signal And USB Touch Signal
2. Provide Secondary Development Resources To Facilitate Integrated Design
3. Boost Simple Development For Embedding Engineering Applications Quickly

Package Includes:

1 x OPTIONS IPS/QLED Display

1 x FPC cable (~ 15cm)

1 x OPTIONS Development Accessories

RP2040 MCU Board, With 1.28inch Round LCD, Accelerometer And Gyroscope Sensor. RP2040-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare. Tiny size with onboard 1.28inch LCD round display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope) and so on, adapting all GPIO and Debug pins, which makes it easy for you to develop and integrate it into products quickly.

Features:

1. RP2040 MCU chip designed by Raspberry Pi in the United Kingdom
2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
3. 264KB of SRAM, and 2MB of onboard Flash memory
4. Type-C connector, keeps it up to date, easier to use
5. Onboard 1.28-inch 240 x 240 resolution, 65K RGB IPS LCD display for clear color pictures
6. Lithium battery recharge/discharge header, suitable for mobile devices

Specifications:

1. Controller: GC9A01A
2. Resolution: 240 (H) RGB x 240(V)
3. Communication interface: SPI
4. Display Size: Φ32.4mm
5. Display Panel: IPS
6. Pixel Size: 0.135 (H) x 0.135 (V) mm
7. Sensor: QMI8658C
8. Accelerometer Resolution: 16 bits
9. Measurement Range (optional): ±2, ±4, ±8, ±16g
10. Gyroscope Resolution: 16 bits
11. Measurement Range (optional): ±16, ±32, ±64, ±128, ±256, ±512, ±1024, ±2048°/sec

Package Includes:

1 x RP2040 MCU Board, With 1.28inch Round LCD,

Waveshare LCD1602 I2C Module, White Color With Blue Background, 16×2 Characters LCD, 3.3V/5V Provides Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino/STM32 Demos and User Manuals, Easier To Develop And Integrate, And Better Expansibility

Features:

1. Incorporates character LCD panel LCD1602
2. I2C control interface, only two signal pins are required, saving the IO resource
3. Compatible with 3.3V/5V operating voltage
4. Comes with online development resources and manual (Raspberry Pi/Jetson Nano/ESP32/Arduino examples)

Specification:

1. Communication Interface: I2c
2. Lcd Controller: Aip31068
3. Operating Voltage: 3.3 ~ 5v
4. Operating Temperature: -20 ~ +70℃
5. Display Panel: Character Lcd
6. Display Size: 64.5 × 16.0mm
7. Characters: 16 × 2
8. Dimensions: 87.0 × 32.0 × 13.0mm
9. Weight: 34 gm

Package Includes:

1 x Waveshare LCD1602 I2C Display Module

1 x Connecting Cable