- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- USB interface
- Resolution of 1 mm
- Multi-sensor operation
- ~250mS between range readings
- Maximum Range of 5000 mm (196 inches)
- 42kHz Ultrasonic sensor measures distance to objects
Add to Wishlist
Add to Wishlist
- Resolution of 1‑mm
- 10Hz reading rate
- Internal temperature compensation
- 42kHz Ultrasonic sensor measures distance to objects
- Maximum range of 5000 mm (195 inches)
- Operates from 2.5V-5.5V
- Low 3.1mA average current requirement
- Small, lightweight module
Add to Wishlist
Add to Wishlist
- Resolution of 1 cm
- Up to 40Hz reading rate
- Simple I2C bus interface
- Easy control of multiple sensors
- Control up to 127 sensors using two wires
- 42kHz Ultrasonic sensor measures distance to objects
- RoHS Compliant
- I2C Bus interface
- Operates from 3.0-5.5V
Add to Wishlist
Add to Wishlist
- FPGA: Intel® Cyclone® 10CL016
- PCI: Mini PCI Express port with programmable pins
- Camera Connector: MIPI camera connector
- Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
- Radio module: u-Blox NINA-W102 (datasheet)
- Board Power Supply :(USB/VIN) 5V
- All pins are PWM pins
- MIPI camera connector
- Mini PCI Express port with programmable pins
- Full-Speed USB Device and embedded Host
Add to Wishlist
Add to Wishlist
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Supported Battery(*): Li-Po single cell, 3.7V, 700mAh minimum
- DC Current for 3.3V Pin: 600mA
- Comes with a micro SD card holder
Add to Wishlist
Add to Wishlist
- Resolution of 1 cm
- Up to 7.5Hz reading rate
- Easy control of multiple sensors
- Control up to 127 sensors using two wires
- 42kHz Ultrasonic sensor measures distance to objects
- RoHS Compliant
- Operates from 3.0-5.5V
Add to Wishlist
Add to Wishlist
- Shorter Time-To-Market
- Give new life to existing products
- Add connectivity for monitoring and control
- Tailor it to your need, each I/O pin can be configured
- Make equipment smarter to be ready for the AI revolution
Add to Wishlist
Add to Wishlist
- Microcontroller: ATmega328P
- Circuit operating voltage: 5V
- The input voltage ranges from 6v to 20V
- Digital I/O Pins: 14
- Analog i/p pins are 6.
- 1 kb of EEPROM memory
- USB connector: USB-C
Add to Wishlist
Add to Wishlist
- ATmega32U4 Microcontroller
- Input Voltage: 7-12V
- 20 Digital I/O Pins
- micro USB connection
Add to Wishlist
Add to Wishlist
- 14 digital inputs/outputs, including 6 PWM inputs
- 6 analog inputs
- 1 ICSP connector
- 1 revised and corrected reset circuit
Add to Wishlist
Add to Wishlist
- Microcontroller: 64 MHz Arm® Cortex M4 (nRF52832)
- Connectivity: Bluetooth® 4.2
- Interface: USB interface with debug functionality
- Tiny size, packed with features
- Low power consumption
- Add sensing capabilities to existing projects
- Weight: 2g
Add to Wishlist
Add to Wishlist
- MICROCONTROLLER: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- This Arduino MKR1000 WIFI without headers
- 5V board power supply
- Supports Li-Po cell, 3.7V, 700mAh minimum
- 8 digital I/O pins
Add to Wishlist
Add to Wishlist
- Chip: ATMEGA4809
- Clock Speed: 20MHz
- Memory: 48KB
- Interface: USB, SPI, 12C, UART
- USB Vin: 5V
- Input VIN : 6-21V
- Operating Voltage: 5V
- I/O PINS: Digital PIN 14, PWM 5, Analog 8
- Dimensions: 18x45mm
Add to Wishlist
Add to Wishlist
- STMicroelectronics STM32H747AII6 Dual ARM® Cortex® – M7 core up to 480 Mhz + M4 core up to 240 Mhz
- Memory: 2MB Flash / 1MB RAM,16MB QSPI Flash for storage
- Interface: USB interface with debug functionality
- Wi-Fi and Bluetooth® Low Energy connectivity
- Supports Micro Python
Add to Wishlist
Add to Wishlist
- Operates Voltage: 3.3-5.5V
- Current: 3.4mA
- Resolution: 1 cm
- Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Pulse Width
- Firmware filtering for better noise tolerance and clutter rejection
- 42kHz Ultrasonic sensor measures distance to objects
- 10Hz reading rate
Add to Wishlist
Add to Wishlist
- Operates Voltage: 2.5V-5.5V
- Current: 3.1mA
- Resolution: 1‑mm
- Reading rate: 10Hz
- Measures distance to objects: 42kHz
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000