- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Fuel gauge system for single-cell lithium-ion batteries
- Can be connected in a circuit to monitor the battery.
- Hardware and Software Reset.
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Input Voltage: DC 6-60V
- Display Accuracy: 0.1V
- Control Accuracy: 0.1V
- Output Type: direct output
- Voltage Tolerance: ±0.1V
- Apply For:6-60V Lithium Lead-acid battery
Add to Wishlist
Add to Wishlist
- Power Supply Voltage:13.8-14.8V
- Relay Operating Voltage:12.4V
- Relay Disconnect Voltage:14.8V
- Voltage Tolerance:+/-0.1V
- Voltage Detection Way: DC voltmeter
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- On-chip display RA
- DPI 111
- Interface UART
- Baud rate with Arduino 230400
Add to Wishlist
Add to Wishlist
- 2A internal switch (~2.5A peak limiting)
- 1000mA+ from a 3.7V LiPoly/LiIon battery.
- Low battery indicator LED lights
- PCB Dimensions: 19mm x 32mm x 5mm / 0.7″ x 1.3″ x 0.2″
- Weight: 2.5g
Add to Wishlist
Add to Wishlist
- Input:5V 2.1A
- Output:5V/1A or 5V/2.4A(Quick Charge )
- Size:66*18*16mm
- Protect Function: Overcharging; Overdischarging and overload protection
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Display size: 84.8mm × 63.6mm
- Dot pitch: 0.212 × 0.212
- Resolution: 400 × 300
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 200×200
- Dot pitch: 0.138 × 0.138
- Refresh time: 8s (Transmit time is not included)
- Display color: black, white, red
- Viewing angle: >170°
Add to Wishlist
Add to Wishlist
- Buttons: 1. Voltage Switch, 2. ON-OFF
- Working Temperature: -20 °C~70 °C
- Output Port: USB or Expansion port
- Output Parameters: 5V/3A or 3V/1A
- Conversion Efficiency: up to 95%
Add to Wishlist
Add to Wishlist
- Brand: Waveshare
- Product: 1.64inch square E-Paper (G) raw display, 168 × 168
- Operating Voltage: 3.3V
- Display Color: Red/Yellow/Black/White
- Interface: 3-wire SPI, 4-wire SPI
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000