- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- On-chip display RA
- DPI 111
- Interface UART
- Baud rate with Arduino 230400
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Display size: 84.8mm × 63.6mm
- Dot pitch: 0.212 × 0.212
- Resolution: 400 × 300
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 200×200
- Dot pitch: 0.138 × 0.138
- Refresh time: 8s (Transmit time is not included)
- Display color: black, white, red
- Viewing angle: >170°
Add to Wishlist
Add to Wishlist
- Development board Model: EC-01-Kit
- Adaptive pattern combination: EC-01
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 33.9*28.4*13(±0.2)mm
- Processor: Cortex-M3,
- Support: MPU
- Configurable: CPU frequency, Max 204MHz
- Storage: 4MB NOR Flash on chip
Add to Wishlist
Add to Wishlist
- Module: name ESP-C3-M1-I
- Package: SMD-61
- Size 12.5*13.2*2.4(±0.2)mm
- Antenna: IPEX interface
- Frequency Range: 2400 ~ 2483.5MHz
Add to Wishlist
Add to Wishlist
- Model ESP32-C3F/ ESP-C3-12F
- Package/Case SMD22
- Data Rate: up to 150Mbps
- Supply voltage: 3.6V
- Current: >500mA
Add to Wishlist
Add to Wishlist
- Module: Ca01
- Communication standard: 4G
- Applicable frequency band: LTE-FDD: B1/B3/B5/B8, LTE-TDD: B34/B38/B39/B40/B41
- General characteristics: 3GPP E-UTRA Release 13
- bandwidth:1.4/3/5/10/15/20MHz
- Normal working temperature: -35 ° C ~ + 70 ° C
Add to Wishlist
Add to Wishlist
- Development board Model: EC-01F-Kit
- Adaptive pattern combination: EC-01F
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 33.9*28.4*13(±0.2)mm
- Processor: Cortex-M3,
- Support: MPU
- Configurable: CPU frequency, Max 204MHz
- Storage: 4MB NOR Flash on chip
Add to Wishlist
Add to Wishlist
- Processor: Cortex-M3,support MPU
- Storage: 4MB NOR Flash on chip
- System: Flexible Configuration Support 1.8/2.8/3.3V IO
- Development board Model: EC-01G-Kit
- Adaptive pattern combination: EC-01、EC-01G
- Packaging: DIP-14(2.54Spacing standard row needle)
- Size: 37.6*32.5(±0.2)mm
Add to Wishlist
Add to Wishlist
- Built-in Flash: 32Mbit
- Power supply: 5V
- WiFi protocol: IEEE 802.11 b/g/n
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- Logic level: 3.3V
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000